Hey! Welcome to our best breathable work boots review round-up for 2022 (updated for 2023).
In A Rush?!
Overall, The Best Breathable Work Boots
We’ve put together a list of the top 9 work boots that are great for sweaty feet and our #1 recommendation based on what we’ve found in our research is theKeen Utility Lansing.
What's Inside?
- Overall, The Best Breathable Work Boots
- Compare Prices
- Our list of the 10 best breathable work boots for sweaty feet
- Best Breathable Work Boots With Steel Toe Cap
- Great Work Boot For Light Industrial Work
- Breathable Steel Toe Work Boots For Construction
- Breathable Military Tactical Work Boot
- Stylish Soft Toe Breathable Work Boots
- Good Breathable Work Boots For Wide Feet
- Breathable Pull-On Work Boots
- Reviews of the best rated breathable work boots for men and women
- 1. Keen Utility Lansing
- 2. Oristaco
- 3. Carhartt FastDry
- 4. Timberland Drivetrain
- 5. Thorogood Crosstrex
- 6. Free Soldier
- 7. Red Wing Heritage Classic
- 8. Danner Kinetic
- 9. Irish Setter Crosby
- Breathable Work Boots Buyer’s Guide
- Aren’t all work boots breathable?
- What type of material can you find in a breathable work boot?
- Difference between breathable and non-breathable work boots?
- Who needs breathable work boots?
- What happens when you don’t use breathable work boots?
- Why are you sweating so much in your work boots?
- 9 Tips to keep your feet from sweating a lot in work boots
- Are Waterproof Work Boots Breathable?
- What to look for in a pair of breathable work boots
- What’s The Best Place To Buy Breathable Work Boots?
- Breathable boots for work: Bottom line
- Best Overall Pair Of Breathable Work Boots
To bring you this article, we’ve researched over 30 websites, looked at 35 different best work boot brands and models made with breathable materials, and have read dozens of customer reviews and feedback for each make of boot that made the cut, as well as a few that did not.
Overall we’ve spent over 72 hours looking into all of these great breathable work boots to bring you the most important information for each boot.
In this article, you’ll learn about which are some of the newest and best breathable work boots plus some things to consider before buying your breathable boots (and much more).
So keep reading. There’s a lot of good info in here…
You can jump straight into thebreathable work boots reviews sectionor go to thebuyer’s guidefirst (if you’re new to this type of boots).
Our list of the 10 best breathable work boots for sweaty feet
Here’s a quick comparison table if you’re curious about which work boots we’ve included in our round-up.
1. Keen Utility
- Mesh liner
- Textile & Leather
- Steel toe
Best Breathable Work Boots With Steel Toe Cap
2. Oristaco
- Memory foam insole
- Synthetic knitting
- Steel toe
Great Work Boot For
Light Industrial Work
3. Carhartt FastDry
- FastDry Tech
- 100% synthetic
- Steel toe
Breathable Steel Toe Work Boots For Construction
4. Timberland
- Anti-fatigue tech
- Ripstop nylon
- Composite toe
Lightweight Work Boots For Restaurant & Kitchen
5. Thorogood
- Composite shank
- Leather + mesh
- Composite toe
Breathable Boots For Warehouse & Retail Work
8. Danner Kinetic
- Nylon shank
- Leather + textile
- Soft toe
Reviews of the best rated breathable work boots for men and women
Finding a good breathable work boot can be a stressful task. That’s because there are so many different brands and models that it is difficult to know which ones will work best for you.
Here, we review the top 9 best breathable work boots based on customer satisfaction ratings and overall quality.
We cover everything from boots with waterproofing to those with breathable mesh uppers, so no matter what your needs are, you’ll find something here!
1. Keen Utility Lansing
Steel Toe Breathable Work Boots
For Tool And Die Maker
Are you a tool and die maker looking for a comfy pair of breathable work boots? The KEEN Utility Steel Toe Work Boots are all you need.
Durable waterproof material makes Keen allow you to wear it for an extended period.
Keen promises ultimate comfort. Its leather material has a moisture-wicking lining to keep your feet dry while you work in wet areas. Since it leverages a natural, probiotic-based technology known as CLEANSPORT NXT, smelly feet should be the least of your worries.
You’re free to change your boots’ insoles to enhance comfort.
The Keen work boot features a unique asymmetrical steel toe design to provide the stability and support you need to work on your projects. The rubber soles are oil and slip-resistant to prevent you from falling and injuring yourself.
- Check out my in-depth review of these KEEN Lansing boots
- Read More Keen Work Boots Reviews Here
PROS
- Comfy work boots
- Asymmetrical steel toes to protect you and allow for a better fit
- Removable and changeable insoles
- Are durable and waterproof
CONS
- The laces wear away quickly, so you might have to replace them after a few months.
Check out my review of this boot on YouTube
2. Oristaco
Breathable Boots For
Lightweight Industrial Work
If lightweight industrial work such as food processing, manufacturing, and transport & logistics is your thing, you need the Oristaco Work Steel Toe Boots.
Oristaco boots bring you abrasion-resistant uppers designed to last.
The boot comes with multiple safety features, such as the steel toe cap to protect you against sharp objects such as nails, impact, and compression. Then, there’s the non-metal material midsole for puncture resistance and a slip-resistant sole.
The Oristaco Work Boots have breathable, synthetic knitting uppers with a moisture-wicking fabric lining. These guarantee cool feet even in hot weather. The memory foam insoles mold to your feet’ shape to maximize your comfort.
Then, since these unisex boots weigh less than 2 pounds, so you can effortlessly wear them all day without tiring.
Editor Note
I’ve worked once with someone using these boots whilst working on a farm doing landscaping. I liked how his feet would never sink in the soft soil we were working on. So consider these ones if you’re working or doing hiking at the farm for example.
PROS
- Comfortable work boots
- Safety
- Designed to last
- Lightweight, versatile work boots
- Suitable for both men and women
CONS
- The insole may wear down at the heel after a short time.
3. Carhartt FastDry
Breathable Steel Toe Boots
For Construction Workers
This Carhartt lightweight steel toe boot has some great features that make it suitable for various outdoor workers, including those in construction.
Carhartt is a work boot you can depend on for a long time, thanks to its sturdy construction with quality black mesh and synthetic material.
This boot features electrical protection against circuits of up to 18,000 volts. In addition, its Ax Suede top covering material improves grip and prevents slippage when you’re on site.
Expect nothing short of maximum comfort when wearing Carhartt boots at your workplace. It’s inside engineered footbed that Carhartt designed using 120,000 3D foot scans improves its fit and, consequently, its comfort.
It also utilizes moisture-wicking fast-dry technology to keep your feet cool always.
PROS
- Lightweight work boots
- Comfortable
- Protects you against electrical hazards
- Multi-purpose work boots
CONS
- The footbed might not fit all users, causing a little discomfort.
4. Timberland Drivetrain
Lightweight Boot For
Restaurant & Kitchen Work
Have you always wanted a super lightweight pair of quality boots to wear to work every day? Well, you need to give Timberland, which comes in many colors, a chance.
These Timberland Pro Drivetrain boots have a durable sole for extended use. Their uppers are abrasion-resistant, making them hard to tear or scratch.
Timberland boasts a composite safety toe for impact and compression resistance. Its footbed utilizes reliable anti-fatigue technology and polyurethane to offer you much-needed shock absorption while you’re in the kitchen.
Comfort is another thing that these work boots provide, owing to their breathable uppers. No matter how hot it gets in the kitchen, rest assured that your feet will remain cool.
PROS
- Lightweight and suitable for daily use
- Anti slip outsole
- Provide maximum comfort
- Available in an array of colors
- Composite safety toe
CONS
- These boots aren’t fireproof
5. Thorogood Crosstrex
Great Breathable Boots For
Warehouse & Retail Workers
The Thorogood Men’s Crosstrex Boot is a work boot that’s worth your money. Its fantastic combination of features is bound to impress you.
The Crosstrex Thorogood comes with an abrasion-resistant reinforced heel and toe that is pretty difficult to destroy. The leather/mesh material is long-lasting.
The boot features a composite safety cap to protect your toes.
This is one of the reasons these Thorogoods are great for warehouse and retail workers. Because the composite toe makes them lighter but still can keep you safe from objects falling on your toes.
This pair of classic, lightweight Thorogood work boots is waterproof and breathable. With them, you can confidently work in wet environments without getting your feet moist.
Thorogood has some of the best summer work boots, so; you don’t need to stress over sweaty feet during hot weather.
PROS
- Removable footbed
- Composite toe & shank
- They are multi-purpose
CONS
- These boots may not be convenient for those with wider feet.
6. Free Soldier
Breathable Duty Boots
For Security Work
If you’re looking for the perfect boots for your security job, consider the Free Soldier Breathable boots. These check all the right boxes to give you real value for your cash.
These affordable work boots are made from water and scratch-resistant suede leather material with reinforced fabric for durability. Their wear-resistant rubber outsole enhances the latter.
Free Soldier work boots provide ankle-high protection. The gusseted tongue keeps dust and debris away from your feet.
You’ll like the shock-absorbing heels and anti-slip rubber soles that prevent you from falling.
There is no doubt that the Free Soldier boots are designed for comfort. In addition to cushioning, they also have shock-absorbing EVA midsoles.
Additionally, you can remove the POLIYOU insoles and wash them to increase permeability.
If you’d like a safety toe instead of a soft toe, then you can choose this model. This boot has a steel toe cap that protects you from compression or crushing your toes, yet, it comes with all the other breathability features that Free Soldier offers.
PROS
- Breathable and ultralight
- Scrach resistant
- Non slip outsole
- Affordable
CONS
- No arch support
7. Red Wing Heritage Classic
Soft Toe Breathable Work Boots
Red Wing combines style and function to provide everything you could look for in a work boot.
If you’re hunting for a great rugged boot to wear for some years, this is it!
Red Wing’s elegant Norwegian welt construction gives it durability and strength. This boot’s treaded outsole is conveniently thick (about 0.75″ inches), and its leather upper is waterproof.
Comfort is one of the things to look for in a quality work boot, and this one doesn’t let you down. With a boot opening of about 6″ around, you can comfortably wear your Red Wing and lace it.
This boot is also sweat-resistant for cool feet at all times. This type of boot is best for you if you do a lot of office work or indoors. Being made out of leather it will get hot inside if you do hard work such a construction person would.
PROS
- Stylish boot
- It’s long-lasting
- Very comfortable
- You can wear it to casual occasions
CONS
- Not the most breathable since it’s made fully of leather
8. Danner Kinetic
Wide Breathable Work Boots
For Flat Feet
Sometimes, finding the perfect work boot for flat feet can be a hassle. Danner work boots allow you to remove the original insoles and add orthotics instead. So, these boots are good for anyone with flat feet.
Lasting leather & textile material makes Danner. The boot also features a durable rubber sole that enables you to walk on various surfaces, including rugged terrains, without damaging it.
Danner features a polyurethane footbed for ultimate comfort especially if you have flat feet.
Its ripstop nylon upper has a GORE-TEX liner that makes it breathable and waterproof, allowing you to be productive when in both wet and hot climates.
Danner is an ankle-high boot that protects your feet at all times. Make sure to tie it properly to prevent dust particles from getting inside and also to give you good ankle support.
PROS
- It comes with a quality midsole to provide support
- It can last long, even if you wear it in harsh environments
- Super comfortable work boot
- Resists slippage
CONS
- The boot lacks a steel or composite toe
9. Irish Setter Crosby
Pull On Breathable Work Boots
Irish Setter is a hunters’ boot that could be incredibly useful on the site. It has all the features you need to feel safe and comfy. And, there’s a reason we rank the Irish Setter as one of the best pull-on work boots.
Irish Setter comes with a durable 40% nylon and 60% leather material. It utilizes ARMATEC technology that renders it abrasion-resistant and extremely tough.
This enables the boot to withstand harsh conditions and lengthens its life.
The Irish Setter safety toes protect you from common work hazards such as heavy objects crashing your feet when you’re right in the middle of an important task. This boot has also fulfilled ASTM F2413-11, I/75C/75 impact, and compression standards.
Irish Setter’s smooth opening that measures about 12.75″ allows you to wear it comfortably. Its UltraDry construction has a moisture-wicking lining with waterproof materials. Your feet will remain dry as long as you have this boot on.
PROS
- Made of lasting nylon and leather
- Abrasion resistant
- Electrical hazard rated
CONS
- Great for summer, not so great when it’s geeting cold
Breathable Work Boots Buyer’s Guide
Aren’t all work boots breathable?
Not all work boots are breathable. Instead, only those that are made of breathable material are good for sweaty feet.
Breathability is the ability of a workbook fabric to allow the moisture and perspiration from your sweat to diffuse away from the boot.
Of course, most materials that make work boots, including leather, have a degree of breathability. But, the moisture-wicking ability varies from material to material.
So, even though all work boots would be breathable, their moisture vapor transmission rate would differ.
For instance, the degree of breathability in cotton and wool is far higher than leather or solid polymers. Also, nylon and polyester fabrics tend to draw sweat away from your skin and the surrounding environment.
Therefore, you might sweat more in leather work boots than polyester or polyester.
The breathable mesh lining is the main signature of all breathable work boots. Almost every breathable work boot has got the mesh lining feature.
Some advanced designs have high and breathable fabric that wicks the moisture away and absorbs the sweat from your feet.
But, the design and weaving technique of a work boot can make your feet sweaty. The best breathable work boots have materials that wick away moisture and protect you from any external corrosion.
Here is a table that shows to what degree work boot materials are breathable
| Fabric or Material | Breathability | Ability to wick sweat and moisture | Suitable for: |
| Cotton | Highly breathable | Absorbs sweat | Inner boot linings |
| Leather | Low breathability | Low | Exterior layer of high-end Performance safety work boots |
| Solid polymer | Low | Low | Exterior layer of Safety waterproof work boots |
| Nylon | Depends on the weaving design | Advanced moisture-wicking tech | Athletic boots, winter work boots |
| Polyester | Depends on the weave structure | Polyester needs advanced weaving techniques to wick moisture | Normal shoes |
| Rayon | Breathable and airy | Highly absorbent | Inner parts of the work boot |
| Sheep Wool | Highly breathable | Excellent absorbency and moisture-wicking | Socks and inner layers of high-end boots |
What type of material can you find in a breathable work boot?
The materials that make a breathable work boot are the same materials that make their waterproof counterparts work.
The difference is in the construction process. For waterproof boots, these materials are sealed inside of a boot where water can’t penetrate them.
However, for breathable boots, the material is either made as an outer layer or added to improve the breathability of an already existing waterproof boot.
The three main components that go into making your boot breathable include:
- mesh paneling,
- perforated leather sections
- and ventilation holes/grommets.
This allows sweat to escape through evaporation rather than being “trapped” within the boot itself.
When looking for a new pair of boots, many people have the impression that they are breathable. People normally think that leather boots are breathable.
But, boots are not breathable by default.
Difference between breathable and non-breathable work boots?
Non-breathable work boots are made of thicker, tougher material. They keep your feet dryer, but they can get too hot in the summer months.
Breathable work boots allow sweat to evaporate through the holes in the boot’s leather or fabric uppers.
If you’re working in extremely wet conditions, get waterproof non-breathable boots instead.
However, if your job is more on the light-duty side, get breathable work boots that are lighter and easier to walk in for longer periods.
Who needs breathable work boots?
Breathable boots are best for:
- Workers in construction or other jobs where they’re on their feet all day long and need a breathable, odorless boot to keep their feet fresh throughout the day.
- Workers who spend hours each day walking around retail stores, museums, zoos – anywhere that requires lots of walking and standing.
- Workers trying to keep their feet dry and safe from bacterial and viral pathogens that thrive in damp and warm places.
Work boots make you sweat because they don’t let your foot breathe and are designed to keep your feet warm and safe, not dry. The breathable work boots do both!
What happens when you don’t use breathable work boots?
If you’re working in the summer, you certainly need to keep your feet free from sweat. Unfortunately, your skin keeps producing a lot of sweat and faints, which accumulate and risk your feet’ health.
If you don’t wear breathable work boots, your feet may get sweaty, smelly, and sick. High temperatures make your feet skin hard. Cracks often accompany skin hardness and make you scaly.
Then, fungi like hot and moist areas of your feet, and if you don’t have breathable work boots, you could easily end up with other illnesses and fungal infections. Normally, feet infected with fungi have a bad odor. Sweaty feet are itchy too.
Breathable boots eliminate the need to rock and scratch your feet often. Too much scratching can cause chafing and blisters, which can be painful and uncomfortable.
Why are you sweating so much in your work boots?
What makes your feet sweat so much inside your work boots? Pathogens, the environment, and the boots you wear are all to blame for soaking your feet in sweat.
How you wear your work boots
If your boots don’t fit correctly, heat and moisture build-up inside the boot.
The way you lace up your boots and the material they’re made from could be the reason you have sweaty feet!
Properly laced boots reduce moisture build-up by allowing better airflow through them. This will allow any stale air inside the boots to reheat and allow fresh air to enter.
It’s just too hot
The environment could make your feet sweat in your work boots. If you’re going from a cold into a hot place, sweat will accumulate inside the boots.
Even when you go outside, wear your work boots in temperatures above 40° F (4° C), and your feet will sweat like crazy!
If it’s too hot for you to walk around barefoot, it’s too hot to wear your boots unless you are working outdoors.
Wearing smart-wool socks reduces moisture build-up caused by sweaty feet. You’ll want to start with a thin lining, then add thicker wool layers as colder weather sets in!
Carefully cleaned and processed sheep’s wool is effective at managing moisture. The wool wicks away sweat and moisture while still allowing airflow.
Too much friction on the insoles
Packing your feet too tightly in your boots can cause too much friction. And, when your feet and boot rub against each other, you sweat and get a lot of blisters.
If your work boots feel uncomfortable rubbing on either the insoles, try loosening off the laces. Loose laces have plenty of room for your feet to move and this minimizes friction and reduces the pressure you put on your feet.
There’s too much movement in the boots.
If there’s a lot of room inside your work boot, this can also cause your feet to sweat. Loosely laced boots cause too much movement of the feet.
The increased friction between both the insoles and upper parts of your boot causes you to sweat and have blisters. The solution is to purchase perfectly-sized footwear or try wearing thicker socks.
A problem with the material and boot construction
Leather boots are usually known for being fairly hard-wearing. Still, if they’re not treated properly after use, then they can become misshapen and start to squeeze against your foot when put back on again.
Again, this causes an increase in friction and an unpleasant amount of heat.
Then, if the material is not breathable, it traps moisture and soaks your feet in sweat.
Sick feet
One common cause for sweaty feet is hyperhidrosis, also known as excessive sweating.
If you have this condition, your feet won’t be the only part of your body constantly covered in a layer of moisture. But, the resulting sweaty feet can be very uncomfortable nonetheless.
9 Tips to keep your feet from sweating a lot in work boots
Several techniques can help you reduce the amount of moisture being produced from your feet. But, make sure that your feet and footwear are clean and dry.
We recommend changing socks regularly. But, if this doesn’t work for you, try wearing foot powder instead.
Check these tips out:
1. Change to a lighter pair of socks
Wearing thicker, cotton-style socks can help to prevent blisters from forming on your skin. But, they’re not particularly breathable materials which means they trap even more heat than usual.
Try swapping them out for a lighter, synthetic material instead, and the moisture will escape more easily.
2. Foot powder
Do you get breaks within your shift? Or, do you have a changing room? If yes, foot powder is an excellent tip.
Use the chance to get your workboots off your feet. Sprinkle some foot powder on the insoles of both feet and leave them uncovered until they’re completely dry.
When you put them back on afterward, you’ll keep your feet cool all day long without resorting to changing socks every hour or so.7
3. Change footwear
If you work outdoors, the heat from the sun could cause your feet to sweat even more than usual.
Try wearing a pair of boots made from a different material. Or, at the very least, change your socks.
Synthetic material is better than leather when it comes to breathability. So if you own only leather boots, see if you can buy a pair of breathable work boots at least only for summer or hot season.
4. Use talcum powder
This is an age-old trick that’s relatively easy to get hold of and works in the same way as foot powder does.
Sprinkle some on both insoles before you put them back on and allow them to dry completely before stepping out into the heat again
5. Wear Breathable work boots
I know! DUH! 🙂 That’s the main topic of this post. But yes, get a pair of breathable boots with mesh ventilation panels.
It helps draw the moisture away from your feet. They’ll keep the air flowing and, of course, your feet will breathe more easily as well.
6. Change your socks more often
If you wear waterproof boots, then definitely consider changing your socks more than once during a shift.
Having multiple pairs on is another good solution if it’s comfortable enough for you to do so. Socks that are thin enough allow airflow out of the top and bottom of your footwear.
7. Change insoles over time
Old insoles can yield bacteria and fungus. Pathogens in the insole lead to smelly and potentially dangerous foot conditions such as athlete’s foot or, worse: plantar warts.
So, change your insoles after three months of use.
Are Waterproof Work Boots Breathable?
Waterproof boots may be breathable if constructed with the appropriate materials and have an effective waterproofing coated layer.
Waterproof hiking boots, on the other hand, are generally less breathable than non-waterproof boots. That’s because when we talk about ventilation and breathability, we’re not talking about exchanging air; we’re talking about moisture exchange.
When someone asks for a boot to be breathable, they usually want heat and dampness produced by their feet to evaporate naturally, keeping the boot’s interior cool and dry.
Generally, the more breathable your boots are, the less waterproof they are.
This is because it makes the boot very breathable. You must use materials that allow water vapor to pass through them easily.
These same materials are always breathable but not necessarily waterproof. If you’re not sweating enough for this to be an issue, it may not matter which kind of boot you choose.
Most work boots are made of leather and sometimes coated with polyurethane. This cotton material makes the boots waterproof and protects you from moisture.
So, the moisture from the sweat that comes from your feet is trapped inside the boot. And, because the moisture in your boot does it pass through this material, it soaks your feet in sweat.
Remember, the primary reason you buy waterproof work boots is to keep your feet dry. But, without the breathable fabric, they both achieve the exact opposite.
What to look for in a pair of breathable work boots
To choose the best pair of breathable boots, understand the specific features you should be looking for.
The market has several boot options, so knowing the top features to consider when buying work boots helps a lot!
Weight of the boot
The average weight of a pair of breathable work boots is between 2 pounds and 4.5lbs.
If you work in a warehouse or shop that requires extensive walking, lightweight boots will be key to your success on the job.
Boots can make a big difference in how tired your feet and legs feel at the end of a day. So, it’s important to find boots that are as lightweight as possible.
However, the weight of a work boot accrues from the safety and durability features. The leather, metallic and rigid anti-puncture construction all add to the weight of your boot. That’s why the safest work boots are also the heaviest.
Then, the lighter a boot is, the more likely it may not hold up against extensive wear and tear. For this reason, choosing lightweight boots with great construction materials will go a long way.
Construction Material
The type of material used in the boot’s construction can make a big difference in their safety and durability.
Boots that are durable and high-quality can hold up against your extreme work conditions.
If you work outdoors, boots with non-slip soles will help keep you safe on wet or slippery surfaces.
Leather boots may be the preferable option for indoor work over other materials since they will hold up against long-term use and offer more protection.
For a good balance between comfort and durability, synthetic materials may be the best bet.
Break-in Period
If you have had past experiences with boots that have been difficult to break in, it may be a good idea to choose another pair.
Work boots must fit properly, especially around the heel, where they can rub at first.
While it isn’t fun to break in a new pair of boots, you should make sure they are comfortable after these first couple of weeks. You can also try the cobbler’s techniques to break in a stubborn work boot.
Safety features
For added protection, look for boots with safety features such as steel toes or puncture-resistant soles.
Some of these special soles can be slip-resistant too. Steel toes should always be kept clean to prevent injury from the exposed metal pieces inside.
Breathable mesh
If you work in a hot environment, breathable mesh boots can help keep your feet cool and dry.
These boots also tend to be lightweight and low-maintenance.
Waterproofing
For wet environments, waterproof boots with rubber soles are a good choice. Boots should be made from materials that keep water from seeping past the stitching and through seams on the boot.
Durability
The best work boots hold up against the beating you put them through. Go with a solid construction made of quality material that will last for years to come.
Arch support
Boots should be supportive and comfortable, especially if you are spending long days on your feet.
Look for boots that provide arch support or insert options to ensure your feet stay protected all day long.
Odor control technology
For workers who are on their feet all day, appropriate odor control can be a key feature in choosing the right pair of boots.
Some work boots have special moisture-wicking material to combat sweat and bacteria. There are also deodorizing sprays that will keep your boots fresh after use.
The Price
The price of a breathable work boot is usually between $65.00-180.00, depending on the specific brand and whether you are purchasing it online or in person.
When buying breathable work boots, keep in mind the weight- lighter boots are typically more expensive than standard boots.
These lighter boots are also made with less durable leather, making them less expensive than traditional, full-grain leather boots.
What’s The Best Place To Buy Breathable Work Boots?
You can check your local stores, but I believe the best place to buy work boots is online.
The stores grant you access to lots of brands and models from the comfort of your home. Plus the delivery, many times is free.
Here are a few stores you might be familiar with:
- Amazon
- Payless
- Sears
- Walmart
- Target
Breathable boots for work: Bottom line
The bottom line is that no work boots is going to keep your feet as cool as if you’d wear flip-flops. You’ll sweat a little in any work boot because, well, you’re working! It’s normal to sweat
But the boots we’ve included in our review are going to help your feet sweat less. In this review, the Keen Utility Lansing is the outright best pair of breathable work boots out there best on what users have said.
Also, the Carhartt model is coming pretty strong behind due to the FAST DRY technology keeps your feet cool and dry by wicking away all moisture. And, you get insulation from heat and electricity too.
Our buying guide has several options of breathable footwear with safe, durable, and waterproof features.
So if you want a breathable boot, you’ll find one in this complete guide.
Top Choice
Best Overall Pair Of
Breathable Work Boots
Team Members Working On This Page
Adrian – Web Master / Construction Professional
Construction Professional, driver, crane operator, cleaner, head chef … these are just some of the jobs I did in the past. Working in all these different environments taught me that having good footwear to protect your feet from different dangers at work IS PARAMOUNT for any worker! On this website, I aim to share all my knowledge and personal experience in dealing with different footwear and foot care issues, and hopefully, you can get something out of it. Enjoy!
Jessica Flynn – Writer And Researcher
Love technology, going to the beach, take care of my body, and writing (amongst other things). You’ll see my face around here a little bit since I’m responsible for part of the research and writing of some of the articles you’re reading on BestForMyFeet.com. I hope you’ll find our content helpful and enjoyable! See you around, thanks for reading!
